Fast Heat Up Function - Electrolux EOB6631 User Manual

5.4 Fast heat up function

The fast heat up function decreases the
heat up time.
1. Set the fast heat up function. Refer to
the Oven functions table.
2. Turn the knob for the temperature to
set the temperature.
An acoustic signal sounds when the
appliance is at the set temperature.
5.5 Display
A
G
5.6 Buttons
Button
5.7 Heat-up indicator
When you activate an oven function, the
bars in the display
one. The bars show that the oven
temperature increases or decreases.
5.8 Steam Cooking
1. Set the function
B C
F E D
Function
CLOCK
MINUS
MINUTE MINDER
PLUS
TEMPERATURE
come on one by
.
The fast heat up function does
not deactivate after the
acoustic signal. You must
deactivate the function
manually.
3. Set an oven function.
A) Timer
B) Heat-up and residual heat indicator
C) Water drawer (selected models only)
D) Core temperature sensor (selected
models only)
E) Door lock (selected models only)
F) Hours / minutes
G) Clock functions
Description
To set a clock function.
To set the time.
To set the MINUTE MINDER. Hold the
button for more than 3 seconds to acti-
vate or deactivate the oven lamp.
To set the time.
To check the oven temperature or the
temperature of the Core Temperature
Sensor (if applicable). Use only while an
oven function is in operation.
2. Press the cover of the water drawer to
open it. Fill the water drawer with
water until the Tank Full indicator
comes on.
The maximum capacity of the tank is 900
ml. It is sufficient for approximately 55 - 60
minutes of cooking.
ENGLISH 9