HP 830 Command Reference Manual page 9

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface type is specified, this command displays information about all interfaces.
If an interface type is specified but no interface number is specified, this command displays information
about all interfaces of the specified type.
Examples
# Display detailed information about Layer 2 interface Ten-GigabitEthernet 1/0/1.
<Sysname> display interface ten-gigabitethernet 1/0/1
Ten-GigabitEthernet1/0/1 current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e212-ff01
Description: Ten-GigabitEthernet1/0/1 Interface
Loopback is not set
Media type is optical fiber, promiscuous mode set
10Gbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
The Maximum Frame Length is 4096
Broadcast MAX-ratio: 100%
Unicast MAX-ratio: 100%
Multicast MAX-ratio: 100%
Allow jumbo frame to pass
PVID: 1
Port link-type: access
Tagged
Untagged VLAN ID : 1
Port priority: 0
Last clearing of counters:
Last 300 seconds input:
Last 300 seconds output:
Input (total):
Input (normal):
Input: 0 input errors, 0 runts, 0 giants, - throttles
Output (total): 0 packets, 0 bytes
Output (normal): 0 packets, 0 bytes
Output: 0 output errors, 0 underruns, - buffer failures
VLAN ID : none
0 packets/sec 24 bytes/sec 0%
0 packets/sec 0 bytes/sec 0%
1549 packets, 106836 bytes
0 unicasts, 1472 broadcasts, 77 multicasts, 0 pauses
1549 packets, 106836 bytes
0 unicasts, 1472 broadcasts, 77 multicasts, 0 pauses
0 CRC, - frame, 0 overruns, - aborts
- ignored, - parity errors
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
- aborts, 0 deferred, 0 collisions, 0 late collisions
- lost carrier, - no carrier
Never
4