Enable Snmp Trap Updown - HP 830 Command Reference Manual

The bridge-aggregation keyword is available only when Layer 2 aggregate interfaces exist on the
device.
Examples
# Display detailed information about Layer 2 aggregation group 1, which is a static aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 1
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Aggregation Interface: Bridge-Aggregation1
Aggregation Mode: Static
Loadsharing Type: Shar
Port
--------------------------------------------------------------------------------
XGE1/0/1
XGE1/0/2
Table 18 Command output
Field
Loadsharing Type
Port Status
Aggregation Interface
Port
Status
Priority
Oper-Key

enable snmp trap updown

Use enable snmp trap updown to enable linkUp/linkDown trap generation for an aggregate interface.
Use undo enable snmp trap updown to disable linkUp/linkDown trap generation for an aggregate
interface.
Syntax
enable snmp trap updown
undo enable snmp trap updown
Default
LinkUp/linkDown trap generation is enabled for an aggregate interface.
Views
Layer 2 aggregate interface view
Status Priority Oper-Key
S 32768 1
S 32768 1
Description
Load sharing type:
•
Shar—Load sharing.
•
NonS—Non-load sharing.
Port state:
•
S—Selected.
•
U—Unselected.
Name of the aggregate interface.
Port type and number.
Port state: Selected or Unselected.
Port aggregation priority.
Operational key.
76