HP 830 Command Reference Manual page 75

exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the bridge-aggregation keyword, the command displays information about all
interfaces.
If you specify the bridge-aggregation keyword and do not specify an interface number, the command
displays information about all aggregate interfaces.
If you specify the bridge-aggregation interface-number option, the command displays information about
the specified Layer 2 aggregate interface.
Examples
# Display information about Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> display interface bridge-aggregation 1
Bridge-Aggregation1 current state: DOWN
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 3ce5-a6cf-e383
Description: Bridge-Aggregation1 Interface
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
PVID: 1
Port link-type: access
Tagged
Untagged VLAN ID : 1
Port priority: 0
Last clearing of counters:
# Display brief information about Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> display interface bridge-aggregation 1 brief
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
BAGG1
# Display information about all Layer 2 aggregate interfaces in Down state.
<Sysname> display interface bridge-aggregation brief down
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface
BAGG1
VLAN ID : none
Never
Link Speed
DOWN auto
Link Cause
DOWN Not connected
Duplex Type PVID Description
A A 1
70