Download Print this page

Technical Information - Parts Connect IM70 User Manual

Household ice machine

Hide thumbs Also See for IM70:

Service manual (12 pages)

Table Of Contents

Table of Contents

Do not, under any circumstances, cut or remove the third (ground) prong from the power

cord. For personal safety, this appliance must be properly grounded. The power cord of

this appliance is equipped with a 3-prong grounding plug that mates with a standard 3-

prong grounding wall outlet to minimize the possibility of electric shock hazard from the

appliance. Have the wall outlet and circuit checked by a qualified electrician to make sure

the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is

your responsibility and obligation to have it replaced with a properly grounded 3-prong

wall outlet. The ice machine should always be plugged into its own individual electrical

outlet which has a voltage rating that matches the rating label on the appliance. This pro-

vides the best performance and also prevents overloading house wiring circuits which

could cause a fire hazard from overheated wires. Never unplug your ice machine by

pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or abrasion damage along its length or

at either end. When moving the ice machine, be careful not to damage the power cord.

Extension Cord

Because of potential safety hazards under certain conditions, it is strongly recommended

that you do not use an extension cord with this ice machine.

Ice-making/Ice-harvest rated current:

High/low Side Pressure:

Width × Depth × Height:

The technical data and performance index listed above should be used for reference

only. They are subject to change.

* The actual quantity of ice produced per day can vary with room and water conditions.

ElECTRICAl CONNECTION