Major Functions - Parts Connect IM70 User Manual

Ice-Making System Cleaning (Continued)
6. Prepare a sanitizing solution made of 1 ounce of household bleach and 2 gallons of hot water
(95º to 115ºF). Wipe the entire bin, inside and outside, covering the entire surface of the walls.
7. Fill a spray bottle with the sanitizing solution and spray all corners and edges making sure to
cover all surfaces with the solution.
8. Allow the solution to be in contact for at least 3 minutes, then dry.
9. Repeat step 5 to rinse the ice-making system one more time.
10. Set the Power switch to the I/ON position. The machine will return to the regular ice-making
mode. Discard the first batch of ice.
1. Completely automatic operation.
2. When the ice storage bin is full of ice, the machine stops making ice automatically. It starts making
ice again once the cubes are removed.
3. The different colors of the LED display indicate various work modes.
4. A sensitive probe and accurate timer enhance the performance of the ice machine.
5. Built-in compressor protection system.
24
• Ice Machine Cleaner contains acids.
• DO NOT use or mix with any other solvent-based
cleaner products.
• Use rubber gloves to protect hands. Carefully read the
material safety instructions on the container of the ice
machine cleaner.
• DISCARD the first batch of ice produced after clean-
ing.

MAjOR FUNCTIONS