Lubrication Guide - Polaris 9919412 Owner's Manual For Maintenance And Safety

MAINTENANCE AND LUBRICATION

Lubrication Guide

Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 66. Items not listed in
the chart should be lubricated at the General Lubrication interval.
NOTE: The a--arms and lower control arms have grease fittings, but
these components are greased "for life" at the factory. No
additional lubrication is needed.
Lubrication Guide Key
More often under severe use
"
Polaris Premium All Season Grease or grease conforming to NLGI
L
No. 2, such as Conoco Superlube M or Mobilegrease Special
Use Polaris Premium U-Joint Lube every 500 miles, before long
F
periods of storage, or after pressure washing or submerging.
Item
Engine Oil
Brake Fluid
Transmission Oil
Front Gearcase Oil
Front A-Arms
Lower Control Arms
Rear Gearcase Oil
Front Prop Shaft Yoke
(Fig. 1)
Ball Joint (Fig. 2)
Lube
Polaris Premium 4 Synthetic
0W40
DOT 3 Only
Polaris Premium AGL Synthetic
Gearcase Lube
Premium Demand Drive Hub
Fluid
None
None
Premium ATV Angle Drive Fluid
Grease
F
Grease
L
"
Add to proper level on dip-
stick.
Maintain level between fill
lines. See page 36.
See page 78 (400/500)
or page 80 (600/700).
See page 79.
Greased for life at factory
Greased for life at factory
See page 81 (600/700).
Grease fittings (3 pumps
maximum).
Locate fitting on back side of
struts and grease with
grease gun.
(Fig. 1)
Method
(Fig. 2)
71