List Mode - JR XP810-3 Manual

3.3 List Mode (Function Mode)
To enter the List Mode, press the DN and SEL keys
simultaneously. From this display, pressing the UP and DN keys
simultaneously will move the system from the list mode to the
3.4 Model Select (System Set-Up Mode)
The XP8103 transmitter employs a memory function which
memorizes data for up to 10 individual aircraft. All settings
along with type selection, function, and different aircraft are
used by one transmitter. For example, Model 1 is helicopter and
Model 2 is airplane. To avoid confusing models, inputing model
Press UP and DN keys
simultaneously to enter/exit
the System Set-Up Mode
To Model Name function
To Info Display function
Press simultaneously
to access function at Press to select either of
cursor two Function List screens
UP DN SELECT
model number (1-10)
Press UP and Select keys
simultaneously to access the
System Mode info display
UP
DN SELECT
Function select
(select model/copy)
www.modelflight.com.au
function shown at the cursor. Note that the cursor is moved by
the UP and DN keys.
CH CH
Inactive while in List Mode screen
names for each aircraft is recommended (see page 107). Press
the UP and DN keys simultaneously and turn the power switch
ON to access the System Set-Up Mode.
The display below shows the model selection function.
CH CH
Model selection
GLID 106
– World's best source of JR products
CLEAR
model name
(if dot is shown, model
name is blank)
modulation
type
CLEAR
(1-10)