Handlebar Adjustments - Polaris 600 HO IQ CFI Owner's Manual

THE PERFECT FIT

Handlebar Adjustments

When making handlebar adjustments, always be sure the handlebars,
brake lever and throttle lever operate smoothly and do not contact the
fuel tank, windshield or any other part of the vehicle when the handle-
bars are turned fully to the left or right.
Handlebar Angle
Follow these steps to adjust handle-
bar angle at the handlebar block.
1. Remove the handlebar cover (1).
2. RIDER SELECT models:
Using a 7/16I wrench, loosen
the four nuts (2) on the bottom
of the adjuster block. Turn the
handlebar left or right to access
the rear nuts.
3. Loosen the four upper adjuster
block bolts (3).
4. Adjust the handlebar to the
desired angle.
5. Torque the front bolts first, then
torque the rear bolts. Torque the
bolts to 11-13 ft. lbs. (15-18
Nm).
6. Reinstall the handlebar cover.
62
1
3
2
RIDER SELECT
Steering Post
1
3
Stationary
Steering Post
4