THE PERFECT FIT
Handlebar Adjustments
Handlebar Angle
1. Securing the handlebar clamp
bolts with an Allen wrench,
loosen each of the four nuts.
CAUTION! Take care to avoid
damaging hand warmer/brake switch
wires when moving components.
2. Adjust the handlebar forward
or rearward to the desired
angle.
3. Be sure the handlebar, brake
lever and throttle lever
operate smoothly and do not
hit the gas tank, windshield or
any other part of the machine
when turned fully to the left or right. If necessary, adjust the left and
right hand controls. See page 43.
4. Tighten the handlebar clamp nuts. Do not over-torque.
Torque: 7 ft-lbs (9.5 Nm)
44
Bolts
Nuts
Nuts