Handlebar Position - Polaris 600 HO IQ CFI Owner's Manual

THE PERFECT FIT
Handlebar Adjustments

Handlebar Position

If your snowmobile is equipped with the RIDER SELECT feature,
adjust handlebar position as outlined on page 27. For models with sta-
tionary steering posts, adjust handlebar position as outlined below.
Refer to the illustration on page 62.
1. Remove the handlebar cover.
2. Loosen the four upper (3) and four lower (4) adjuster block bolts.
3. Adjust handlebar position.
4. Torque the bolts to 15-17 ft. lbs. (20-23 Nm). Torque the front bolts
first.
5. Reinstall the handlebar cover.
63