Pairing The Headset - Sennheiser Urbanite XL Wireless Instruction Manual

Getting started

Pairing the headset

CAUTION
Danger of malfunction!
The transmitted radio waves of mobile phones can impair the operation of sensitive and unprotected devices.
Only make calls with the headset in locations where wireless Bluetooth transmission is permitted.
X
To pair your headset with a Bluetooth device you can either
use the near field communication (NFC) or the Bluetooth
search function. To connect the headset Bluetooth needs
to be activated in both cases.
The headset complies with the Bluetooth 4.0 standard. In
order that data can be transmitted wirelessly, you have to
pair your headset with Bluetooth devices that support the
"hands free profile" (HFP), the "headset profile" (HSP) or
the "advanced audio distribution profile" (A2DP).
The headset can save up to eight Bluetooth devices with
which it has been paired. After switch-on, the headset
automatically tries to connect to the two last connected
Bluetooth devices. You can only connect a third Bluetooth
device after having switched off the first or the second
Bluetooth device.
If you pair the headset with a ninth Bluetooth device, the
saved connection profile of the least used Bluetooth device
will be overwritten. If you want to re-establish a connection
with this Bluetooth device, you have to pair the headset
again.
URBANITE XL Wireless - Bluetooth headset
paired +
connected
paired
| 9