Table of Contents
Advertisement
F5D8636-4_man updated by ARC
Page 47 of 121
[FW07.tif]
For Static IP connection:
1. IP assigned by ISP – Select "No" if your ISP instructed you to use fixed IP.
2. IP Address – Enter an IP address assigned by your ISP for the Router WAN
interface.
3. Subnet Mask – Enter a subnet mask assigned by your ISP.
4. Default Gateway – Enter a default gateway IP address assigned by your ISP.
5. VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI) parameters here. These identifiers are assigned by your ISP.
6. Encapsulation – Select the LLC or VC MUX your ISP uses.
Click "Apply Changes" to save and activate your settings. To go back to the
original settings before saving, click "Clear Changes". Or click any of the Quick-
Navigation links for other options. Your new settings will not be saved unless
your click "Apply Changes".
Hide quick links:
Advertisement
Table of Contents
