Belkin F5D8636-4 User Manual page 108

F5D8636-4_man updated by ARC
Page 108 of 121
In order to determine if wireless issues are related to range, we suggest
temporarily moving the computer, if possible, five to 10 feet away from the
Router.
Changing the Wireless Channel
Depending on local wireless traffic and interference, switching the wireless
channel of your network can improve performance and reliability. The default
channel the Router is shipped with is channel 11. You may choose from several
other channels depending on your region (see the section titled "Changing the
Wireless Channel" on page 48 for instructions on how to choose other channels).
Limiting the Wireless Transmit Rate
Limiting the wireless transmit rate can help improve the maximum wireless
range, and connection stability. Most wireless cards have the ability to limit the
transmission rate. To change this property, go to the Windows Control Panel,
open "Network Connections" and double-click on your wireless card's
connection. In the "Properties" dialog, select the "Configure" button on the
"General" tab (Windows 98 users will have to select the wireless card in the list
box and then click "Properties"), then choose the "Advanced" tab and select the
rate property. Wireless client cards are usually set to automatically adjust the
wireless transmit rate for you, but doing so can cause periodic disconnects
when the wireless signal is too weak; as a rule, slower transmission rates are
more stable. Experiment with different connection rates until you find the best
one for your environment; note that all available transmission rates should be
acceptable for browsing the Internet. For more assistance, see your wireless
card's user manual.
Problem:
How do I extend the range of my wireless network?
Solution:
Belkin recommends using one of the following products to extend wireless
network coverage throughout large homes or offices:
• Wireless Access Point: A wireless access point can effectively double the
coverage area of your wireless network. An access point is typically placed in
the area not currently covered by your G Wireless Router, and is connected
to the Router using either an Ethernet cable or through your home's power
lines using two Powerline Ethernet Adapters.
• For 802.11g (54g™) wireless networks, Belkin offers a Wireless G Range
Extender/Access Point that can be connected wirelessly to a Belkin G
Wireless Router, without requiring an Ethernet cable or Powerline Ethernet
Adapters.
These Belkin products are available at your local retailer, or can be ordered
from Belkin directly.