Motorola AP-6511 Installation Manual page 21

18 AP-6511 Access Point Installation Guide
9. Change the default Password and enter a Location and Contact name
Changing the default password is critical before any configuration customizations are made
to protect the data exchanged between the AP-6511 and its peers. Ensure the Location
represents the AP-6511's deployment area and the Contact accurately reflects the
administrator responsible for this AP-6511 Access Point.
10. Set a Time Zone and Country.
Both the Time Zone and Country should reflect the actual deployment credentials of this
AP-6511, to best assist in any troubleshooting of the device that may be needed.
11. Select any or all of access methods (HTTP, HTTPS, Telnet or SSHv2) used for connecting to
this AP-6511 Access Point.
12. Select the Next button to continue to the Topology Selection screen.