Installing Sysmac Studio - Omron NA-series Startup Manual

3 Preparing in advance
3-1

Installing Sysmac Studio

In the NA-series Programmable Terminal, Sysmac Studio is used as the supporting software that oper-
ates settings of the NA Unit and devices to be connected, creating applications, debugging, and simula-
tion.
Install the Sysmac Studio to PC according to the procedures as follows.
1
Insert Sysmac Studio installation disc into DVD-ROM drive. Set-up program is automatically
started and Select Setup Language dialog box is displayed.
2
Select the language to be installed and click OK button.
Sysmac Studio Setup wizard will be displayed.
3
Install the Sysmac Studio according to the Setup wizard.
4
When the installation is completed, restart the PC.
Additional Information
• Hardware requirement of PC to install Sysmac Studio is shown as follows.
OS
Windows XP SP3
Windows Vista
Windows 7 (32-bit, 64-bit)
Windows 8 (32-bit, 64-bit)
• If the Sysmac Studio cannot be installed according to the procedure as above, refer to the
Sysmac Studio Version 1 Operation Manual (W504).
Precautions for Correct Use
When the CX-One ver.4 or lower is installed, the installation of the Sysmac Studio is cancelled
and the installation is unavailable. In this case, uninstall the CX-One at first and then install the
Sysmac Studio.
3 - 2
CPU
Minimum PC required with a processor
Celeron 540 (1.8 GHz) or
more.
Recom- PC required with a processor
mended Core i5 M520 (2.4 GHz) or
the equivalent or more.
NA-series Programmable Terminal Startup Guide (V120)
RAM Display
2 GB XGA
1,024 x 768 dpi
16,000,000 colors
2 GB WXGA
1,280 x 800 dpi
16,000,000 colors