Yamaha MMP1 Operation Manual page 37

GPI IN functions
Function
Cough Mute
Cough Mute Override
CH Strip RTB
Scene Recall
Snapshot Recall
Talkback Destination
Main Monitor Mute
Main Monitor Dim
Cue Mute
Studio Speaker Mute
Generic Function
Monitor Source Select
All Mute Mode
NOTE
Since priority is given to the input from the GPI [INPUT] connector over operation by MMP1 Editor and MMP1 Controller, the function which
set trigger as "High" or "Low" cannot be turned on and off by the MMP1 Editor and the MMP1 Controller. To operate the function by the
MMP1 Editor and MMP1 Controller, set the trigger to "On Edge" or "Off Edge."
Parameter
Select a channel strip
Select a channel strip
Select a channel strip
Select the Scene number
Select a Snapshot number
Select a Talkback interrupt destination
---
---
Select the Cue output number
Select the studio speaker output number
Select the GPI Out Function number
Select the Monitor Source number
---
Description
Mutes audio from the channel strip mic.
Disables the mic on/off operation by the mic user for
the channel strip selected.
Mutes the input signal to the selected channel strip,
and sends it only to the RTB bus.
Recalls the selected Scene.
Recalls the selected Snapshot.
Turns the selected Talkback on.
Mutes Main Monitor output.
Turns the Main Monitor output dimmer on.
Mutes the selected Cue output.
Mutes the selected studio speaker output.
Turns the GPI Out Function specified by Parameter
on. The Generic Function is not itself a specific
function. Rather, it is intended to be used to change
GPI Out output based on whether this function is
turned on or off.
Select the Monitor Source.
Turns the All Mute function on.
MMP1 Operation Manual
4. Screens
37