Yamaha MMP1 Operation Manual page 27

AES / EBU SRC For turning the SRC (Sampling Rate
Converter) on and off for two-channel
pair units for AES/EBU input/output.
Analog Input Level For selecting the input level (+4dBu/
-10dBV) for two-channel pair units for
analog input and output.
Label
Here you can set a name (label) for Monitor Matrix Out
and Speaker Matrix Out.
Type Displays the Monitor Matrix Out type. You can
configure type settings in "Monitor Matrix" tab
of the "Scene" tab on the Settings screen.
Label Double click to set a Monitor Matrix Out or
Speaker Matrix Out name. Enter a channel
name up to 17 alphanumeric characters and
symbols.
NOTE
Names set here will appear in the "Monitor
Matrix" Out section on the Monitor Matrix
screen, or in the "Speaker Matrix Out" section
on the Speaker Matrix screen.
Speaker Set Displays the Speaker Set to which the
Speaker Matrix Out belongs.
NOTE
You can set the Speaker Set in the "Speaker
Matrix" tab of the "Scene" tab on the Settings
screen.
4. Screens
MMP1 Operation Manual 27