Yamaha MMP1 Operation Manual page 33

User Assignable functions
Function
Headphone Source
Headphone Source Sum
Main Monitor CH Solo/Mute
Main Monitor CH Solo/Mute
Mode
Speaker Select
Talkback Destination
Cough Mute
Cough Status
Cough Mute Override
RTB Status
Oscillator Source
Headphone Mute
Cue Mute
Studio Speaker Mute
LFE Filter
LFE Trim
Snapshot Recall
Filter Type Change to IIR
Generic Function
Parameter
Select the Monitor Source
number
---
Select the Main Monitor number
---
Select a Speaker Set
Select a Talkback interrupt
destination
Select a channel strip
Select a channel strip
Select a channel strip
Select a channel strip
Select a frequency or pink noise
---
Select the Cue output number
Select the studio speaker output
number
---
---
Select a Snapshot number
---
Select the GPI Out Function
number
Description
Select the Monitor Source to output to Headphone L/R as audio.
Turn this on to select multiple "Headphone Sources" at the
same time.
Turns the Main Monitor SOLO or MUTE on or off.
Determines Main Monitor output to Solo or Mute.
Turns Send to the Speaker Set on or off.
Turns Talkback on or off.
Turns the channel strip mic on or off.
Displays the status of the channel strip mic.
Disables or enables the mic on/off operation by the mic user for
the channel strip selected.
Displays the RTB (Return TalkBack) status for the channel strip.
Select a signal to output from the oscillator. This is intended to
give users a means of switching between oscillator frequencies
and pink noise by creating multiple buttons as needed.
Turns mute on or off for headphone output.
Turns mute on or off for the Cue output.
Turns mute on or off for the studio speaker output.
Turns the LFE Filter on or off.
Turns the LFE Trim on or off.
Recall the selected Snapshot.
Turns the option to change filter type from an FIR filter to an IIR
filter on and off. When on, an FIR filter will change to an IIR filter
at the speaker matrix input stage.
Turns the GPI Out Function set with Parameter on or off.
The Generic Function is not itself a specific function. Rather, it is
intended to be used to change GPI Out output based on
whether this function is turned on or off.
4. Screens
MMP1 Operation Manual 33