Memory Function In The Rear Passenger Compartment - Mercedes-Benz S-Class Operator's Manual

114 Seats and stowing
Set the seat, the steering wheel, the Head-up
#
Display and the outside mirror to the desired
position.
Briefly press memory button M and then
#
press preset position button 1, 2 or 3 within
three seconds.
An acoustic signal sounds. The settings are
stored.
To call up: press and hold the relevant pre‐
#
set position button 1, 2 or 3 until the front
seat, the steering wheel, Head-up Display
and outside mirror is in the stored position.
% If you release the preset position button, the
seat, steering wheel and mirror setting func‐
tions stop immediately.
Vehicles with an Active Multicontour
Package: The setting of the active multicon‐
tour seat or the 4-way lumbar support is still
carried out.
Vehicles without the Active Multicontour
Package: Adjustment of the 4-way lumbar
support is still carried out.
Memory function in the rear passenger
compartment
Operating rear seats via the memory func‐
tion in the rear passenger compartment
Storing
Rear seat settings for up to three people can be
stored and called up using the memory function
in the rear passenger compartment.
The following settings can be stored for the rear
seats:
Position of the seat, backrest and head
R
restraint
Active multicontour seats: the seat side bol‐
R
sters of the seat backrest as well as the con‐
tour of the seat backrest in the lumbar and
shoulder regions
Seat heater: distribution of the heated sec‐
R
tions of the seat cushion and seat backrest