Memory Function In The Rear Compartment - Mercedes-Benz S-CLASS 2017 Operator's Manual

Memory function in the rear compartment

122
Selecting the front-passenger seat and rear-
compartment seat
Press the v button repeatedly until the
X
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
Adjust the rear seat accordingly
X
( page 102).
Y
Press the v button repeatedly until the
X
indicator lamp in the button lights up.
The front-passenger seat is selected if the
indicator lamp in the button lights up.
Adjust the front-passenger seat accordingly
X
( page 104).
Y
Press memory button M and one of the stor-
X
age position buttons 1, 2 or 3 within three
seconds.
The settings are stored in the selected stor-
age position.
Vehicles with a rear reclining seat
The power supply or the ignition must be
switched on so that the front-passenger seat
can be selected (
Selects rear-compartment seat
Press the v button repeatedly until the
X
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
Adjust the rear seat accordingly
X
( page 102).
Y
Press the M memory button and then press
X
either the 1 or 2 memory button within three
seconds.
The settings are stored in the selected stor-
age position.
page 146).
Y
Selecting the front-passenger seat and rear-
compartment seat
Press the v button repeatedly until the
X
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
Adjust the rear seat accordingly
X
( page 102).
Y
Press the v button repeatedly until the
X
indicator lamp in the button lights up.
The front-passenger seat is selected if the
indicator lamp in the button lights up.
Adjust the front-passenger seat accordingly
X
( page 104).
Y
Press the M memory button and then press
X
either the 1 or 2 memory button within three
seconds.
The settings are stored in the selected stor-
age position.
You cannot store any settings on the button for
setting the reclined position.
Calling up a stored setting
General notes
The memory positions in the area for the chauf-
feur mode can only be set when the conditions
for the chauffeur mode are fulfilled
( page 106).
Y
Vehicles without rear reclining seat
The power supply or the ignition must be
switched on so that the front-passenger seat
can be selected ( page 146).
Y
To call up the stored rear seat setting:
X
press the v button repeatedly until the
indicator lamp in the button is not lit.
To call up the stored front-passenger seat
X
and rear seat settings: press the v but-
ton repeatedly until the indicator lamp in the
button lights up.
Press and hold the relevant storage position
X
button 1, 2 or 3 until the rear seat or the front-
passenger seat are in the stored position.
i
Seat adjustment is interrupted as soon as
you release the storage position button. The
adjustment of the active multicontour seat is
still carried out.