Fork And Handlebar Installation - Razor E100 Owner's Manual

2B. Fork and handlebar installation. If not already preinstalled, slide a
steering bushing on to the fork as shown in Figure 2. Both bushings are
the same, but the bushing on the bottom interlocks with a key in the
frame and a peg on the fork to limit the steering (see arrow in Figure 2).
Figure 2. Steering bushing and fork. Align the slot with the peg (arrow).
Slide the fork into the frame and install the second steering bushing (A)
and steel washer (B) as shown in Figure 3a. Install the clamp as far as
it will go as shown in figure 3b.
Figures 3a and 3b.
NOTE: Refer to the illustrated parts diagram on page 13 for a
detailed exploded view of the assembly.
5