Entering The Space Heating Water; Temperature - Buderus GB142-24 User Instructions

2.5 Entering the space heating water temperature
Turn the "space heating water temperature" knob to set the
upper limit value of the heater water for the heating opera-
tion. This limitation does not apply to DHW preparation.
Condition
0
Off
90 – 190 Direct setting on BC10
in °F (90 – 190 °F)
Aut
Entry via thermostat
(presetting)
Table 3 Settings of "space heating water temperature" rotary knob
1
The LED under the rotary knob lights up when the heating system is switched on and heat is requested.
In summer mode the heating system is switched off (LED off).
http://www.buderus.net
Explanation
No supply to heating system (only DHW heating operation).
The temperature set on the BC10 is a temperature that cannot
be changed using a RC thermostat. Supply temperature does
not rise above the set temperature.
The temperature is automatically determined on the basis of the
heating characteristic. If no thermostat is connected, the
maximum heater temperature is 190 °F.
Lighting Instructions
110 130
150
90
170
190
LED
Off
1
On
1
On
13