Pitney Bowes DM475 Operator's Manual page 99

Basic Options
Enabling, Changing or Disabling Lock Codes and Passwords
Changing the Lock Code
You can change the Lock Code if it has been enabled.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Change Lock Code".
6. When prompted, enter the current Lock Code and select "Ac-
cept".
7. Enter the new Lock Code, and select "Accept".
8. Re-enter the new Lock Code to confirm and select "Accept". At
the "Lock Code Enabled" message, select "OK".
Enabling the Supervisor Password
The Supervisor Password prevents unauthorized access to account-
ing setup.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Enable Password".
Change Password
Enter New Password
◄ Accept
5. Enter the new Supervisor Password and select "Accept".
6. Re-enter the new Supervisor Password to confirm and select
"Accept".
7. At the "Password Enabled" message, select "OK".
SV62415 Rev. B
***_
7 • System Options
7-11