Advertisement
KENWOOD CORPORATION
3) DISPLAY LCD
No.
Name
1
Dot Matrix(12digits)
2
Dot Matrix(3digits)
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
TX/BUSY INDICATION
No.
Name
1
Red
2
Green
3
Orange
OPERATING BASICS
•
Switching Power ON/OFF
Press the switch to switch the transceiver ON.
Press and hold the switch for approximately 1 second to switch the transceiver OFF.
• Adjusting the Volume
The Volume
Volume
Volume
Volume Up/Down SW
Up/Down SW control to adjust the volume. You can adjust the volume up sw to increases the volume
Up/Down SW
Up/Down SW
and the volume down sw to decreases it.
• Selecting a Channel
The Channel
Channel Up/Down SW
Up/Down SW to select a channel.
Channel
Channel
Up/Down SW
Up/Down SW
The channel up sw the channel number increases and The channel down sw decreases it.
•
Transmitting
Note: Before transmitting, first monitor the channel to make sure it is not already in use.
Note
Note
Note
1 Select your desired channel.
•If the channel is busy, wait until it becomes free.
2
Press the microphone PTT
the PTT
PTT switch when you have finished speaking.
PTT
PTT
•For best sound quality at the receiving station, hold the microphone approximately 1.5 inches (3~4cm) from
your mouth.
Alphanumeric display
Channel/GID display
Signal strength indicator
Monitor on display
Talk around display
Scan display
Message stack display
Priority channel 1/2 display
Telephone ID display
Horn alert display
Option board display
Public address display
Zone add display
Auto Recording Display on VGS-1 option
Auto Reply Message Display on VGS-1 option
CH/GID add display
AUX A display
AUX B display
OST display
TX display
Busy display
Call display
ATING
PTT
PTT switch and speak into the microphone. Release
PTT
TK-7180H-K FCC ID: K4437303210
TK-8180H-K FCC ID: K4437313210
TK-8180H-K2 FCC ID: K4437313220
Description
Channel/GID display
Zone display
OST list number display
Description
Zone display
Advertisement
