System Selection - Denso Intelligent Tester II Operator's Manual

4 Diagnostics Functions
4
Diagnostics Functions
The onboard/offboard check screen is displayed after the opening screen is displayed
when the Intelligent Tester II starts up.
Auto Manual
When or
Intelligent Tester II begins communication with the vehicle and check the ECU.
To execute measurement functions such as the oscilloscope that do not require
communication with the vehicle, touch
NOTE
If you execute the OBD function when the vehicle battery is 8V or less,
the ABS lamp may come on, depending on the vehicle. A warning screen
like the one shown on the right will appear. Recharge or replace the
battery and execute the OBD function again.

System Selection

It is necessary to select the diagnostics system (the system within the vehicle) when diagnosing the vehicle.
The procedure for selecting the system is as follows.
NOTE
The screen on the right may appear before selecting the system
procedure. Select the vehicle to be diagnosed.
Automatic Vehicle Selection
1.
Touch the list box on the system select screen to select the system category.
When the vehicle information is acquired from the vehicle computer (ECU), the system select screen is displayed.
Select powertrain, chassis, or body as the system category.
A list of the vehicle mounted systems being diagnosed is then displayed.
If vehicle information cannot be acquired, a message screen is displayed.
Email: sales@obd2express.co.uk Skype: obd2express.co.uk
is touched on the onboard/offboard check screen, the
Utility
.P.55
- 43 -
Onboard/offboard check screen
Warning screen
Vehicle select screen
T00081E
T00082E
T00083E