Connecting The Probes - Denso Intelligent Tester II Operator's Manual

1 Before Use

Connecting the Probes

There are two types of probe, the voltage measurement tester probe and the oscilloscope probe.
The oscilloscope probes are an accessory for the oscilloscope.
Connecting the oscilloscope probes
The probe tip is secured to the oscilloscope probe with a screw, regardless of whether the probe is an IC clip type, Needle
type, or alligator clip type.
CAUTION
When connecting the probe to the Intelligent Tester II, gently insert it straight into the connector.
Inserting the probe at a slant can break the connector pins.
The tip of the probe is sharp, so handle it carefully.
Do not connect the AC/DC adapter to the Intelligent Tester II, when using the oscilloscope function.
Email: sales@obd2express.co.uk Skype: obd2express.co.uk
- 18 -
T00041E