Touch Panel Compensation Function (Screen Configuration) - Denso Intelligent Tester II Operator's Manual

3 Default Settings

Touch Panel Compensation Function (Screen Configuration)

The touch panel compensation function compensates for the deviation when a key is operated on the touch panel.
The touch panel compensation procedure is as follows.
1.
Touch the + mark displayed in the center of the display.
The + mark moves to the top left of the display.
2.
Touch the new + mark that has moved.
The + mark moves to the bottom left of the display.
3.
Touch the new + mark that has moved.
The + mark moves to the bottom right of the display.
4.
Touch the new + mark that has moved.
The + mark moves to the top right of the display.
5.
Touch the new + mark that has moved.
The screen changes when the + mark disappears from the display.
6.
Touch any point on the display.
The display changes to the opening screen and touch panel compensation is
complete.
NOTE
When touching the + mark, always touch for at least one second. The + mark does not move unless
touched it for at least one second.
Email: sales@obd2express.co.uk Skype: obd2express.co.uk
- 40 -
T00077E
T01077E