Oscilloscope Functions - Denso Intelligent Tester II Operator's Manual

6 Measurement Functions

Oscilloscope Functions

To use the oscilloscope function, it is necessary to connect the optional oscilloscope cartridge.
The oscilloscope probes can be connected to the Intelligent Tester II to observe the voltage waveform for the signals input to
the channels.
Do not connect the AC/DC adapter to the Intelligent Tester II, when using the oscilloscope function.
Oscilloscope Measurement Menu
1.
From the main menu buttons of the system select screen, touch
The function select screen is displayed.
2.
On the function select screen, touch
The oscilloscope measurement screen is displayed.
System select screen
ACTIVE KEY
Saves/plays back/deletes screen images and measurement condition setting data.
Menu
Reference: Page 105
EXIT
Ends the oscilloscope function.
Trigger
Displays the trigger menu screen.
Email: sales@obd2express.co.uk Skype: obd2express.co.uk
Oscilloscope
T00214E
Function select screen
.
T00215E
Reference: Page 101
- 98 -
Utility
.
Oscilloscope measurement menu
screen
T00216E