Additional Information; General Setup Information - Sony SLV-KH7PL Operating Instructions Manual

Additional Information

General setup information

Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for a VHF/UHF antenna, use an antenna
connector (not supplied) to connect the
antenna to the unit.
1
2
3
Attaching a UHF/VHF band
mixer
When using both a 75-ohm coaxial cable
and a 300-ohm twin lead cable for a
VHF/UHF antenna, use a UHF/VHF
band separator/mixer (not supplied) to
connect the antenna to the unit.
1
2
3
4
40
Additional Information
Loosen the screws on the antenna connector.
Wind the twin leads around the screws on the antenna connector.
Retighten the screws.
Loosen the screws on the
mixer.
Wind the twin leads
around the screws on the
mixer.
Retighten the screws.
Connect the 75-ohm coaxial
cable to the mixer.
Antenna
connector (not
supplied)
300-ohm twin
lead cable
75-ohm coaxial
cable
300-ohm twin
lead cable
UHF/VHF
band
separator/
mixer (not
supplied)