Sony SLV-KH7PL Operating Instructions Manual page 11

Antenna hookup:
When connecting the unit to the
TV using only the antenna cable,
you must set the RF UNIT
switch on the rear of the unit so
that the TV can receive the
correct signal from the unit.
1
Set the RF UNIT switch on the rear of the unit to CH3 or CH4,
whichever channel is not used in your area. If both are used, set the
switch to either channel.
2
Press POWER to turn on the unit.
3
Press TV/VIDEO to turn on the VIDEO indicator in the unit's display
window.
4
Turn on your TV and set it to the channel you selected in step 1
(channel 3 or 4).
The clear blue screen appears on the TV screen. To assure that you
correctly select the TV channel for the unit, play a recorded tape.
Whenever you use the unit, set the TV to the channel selected in step 1.
Video cassette player setup
POWER TV/VIDEO
RF UNIT
CH3
CH4
TV
11
Getting Started