Sony HCD-M333 Service Manual page 5

QQ
3 7 63 1515 0
Messages
One of the following messages may appear or
flash in the display during operation.
CD
Cannot Edit
You tried to label a CD-TEXT disc.
CD No Disc
There is no disc in the player.
Name Full
There are already 50 disc titles stored in the system.
OVER
You have reached the end of the disc while pressing
during playback or pause.
M
Step Full!
You tried to program 26 or more tracks (steps).
MD
Assign None
TE
L 13942296513
All the tracks on an MD are registered into groups.
Auto Cut
The MD deck is pausing the recording because
silence continued for 30 seconds or more during
digital recording.
Blank Disc
The inserted recordable MD is new, or all tracks on
the MD have been erased.
Cannot Edit
• A pre-mastered MD is in the deck.
• You tried to edit in Program or Shuffle Play mode.
• The track is recorded in MDLP mode.
Cannot REC
• A pre-mastered MD is in the deck.
• The function is switched to MD or PC.
Cannot SYNC!
• There is no disc in the MD deck, or the MD is
protected against erasure.
• There is no time remaining on the MD.
Complete!
www
The editing operation of the MD is completed.
Disc Full!
.
There is no time remaining on the MD.
Eject
The MD deck is ejecting the MD.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Group Full!
An attempt was made to create a new group in
excess of the maximum number of groups, or there
are insufficient characters for updating the group
management information.
Impossible
• You tried to make an impossible editing
operation.
• You cannot perform Net MD operations during
timer playback.
• You cannot combine or erase the tracks due to the
system limitations of MDs.
Incomplete!
Adjustment of the recording level after recording or
Fade-in and Fade-out procedures have failed since
the system was either subject to vibration or there is
a damaged or dirty disc in the tray.
Initialize
The power was off for a long time, so the system is
initializing itself.
Name Full!
There is no more space to store track, disc or group
titles.
Q Q
3 6 7 1 3 1 5
No Change
While attempting to change the recording level after
recording, you pressed ENTER/YES without
actually changing the recording level, so no change
was made.
No Disc
There is no disc in the MD deck.
OVER
You have reached the end of the MD while pressing
during pause mode.
M
Push STOP!
You pressed an invalid button during playback.
—Rehearsal—
The MD is playing the specified point for
confirmation during the A-B Erase Function and the
Divide Function (pages 30 and 33).
Retry
A reading failure has occurred, and the system is
trying to read the data again.
S.F Edit!
You attempted to perform another operation while
co
in S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) mode.
.
HCD-M333
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9
5