Hunter Memphis User Manual page 9

Wiring
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then
twist clockwise until tight.
Green/Yellow
Stripe
Using an orange wire
connector from
the hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
Refer to CAUTION c.1 on pg. 2
Not for use in
applications where the
fan does not have a
wall switch.
For a Single Switch
Using the orange wire
connectors from
the hardware bag, connect
the black wire (ungrounded)
from the ceiling to the black
from the fan. Connect the
white wire (grounded) from the
ceiling to the white wire from
the fan. Cap the blue wire from
the fan with an orange wire
connector. It will not be used
for single switch wiring
9
M3592-01 • 12/14/15 • © 2015 Hunter Fan Company
www.HunterFan.com
Note: If you have a dual switch,
please cap the secondary power
wire from the ceiling. This will
result in one unused switch.
For Dual Switches
Using the orange wire
connectors from
the hardware bag,
connect the white wire
(grounded) from the
ceiling to the white wire
from the fan.
Connect the black wire
(ungrounded) from the
ceiling to the black wire
from the fan. Connect the
second (ungrounded) wire
from the ceiling to the blue
wire from the fan.
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
1.888.830.1326