Support - Panasonic BB-HGW700A Operating Instructions Manual

Operating Instructions
3.
Click the camera frame you want to access. If
an authentication window is displayed, enter
the camera's user name and password. Then
the camera image is displayed.
Notes
• When refreshing the camera portal, click [Refresh Camera] on the setup page. If you click
the refresh button on the web browser the camera image changes back to a key mark.
• After entering the camera's user name and password and displaying the camera image
once, the camera image, and not the key mark, will be displayed on the camera portal.
When displaying other pages such as setup, the key mark will return, but by clicking on it,
the camera image and not the authentication window will be displayed.
Privacy and Image Right
When installing and using this camera, it is the customers responsibility to not infringe on
privacy or copyright rules and regulations.
* It is generally accepted that " Privacy is the legal right to not have one's private life displayed
in public, and the right to have control over one's own personal information. Image right is
the right to not have portraits or photographic images of one's self created by a stranger or
displayed in public.
When camera images are not displayed on the camera portal...
• Check that the WAN indicator and the LAN indicator supported by the LAN jack
connected to this product are on.
• Sometimes it is necessary to set up the web browser's proxy server to access the
camera portal (see page 87).
• Check that the power supply was turned on in the following order: modem (or ONU),
this product, PC.
• When a camera name, an X mark, a blue unmarked window, or a white page is
displayed on the camera portal, click [Refresh Camera].
• When an exclamation mark is displayed on the camera portal, double-click on it. The
camera's original password window is displayed.
16