Memory Seats; Electric Parking Brake - Cadillac XTS 2018 Convenience/Personalization Manual

MEMORY SEATS ♦
SET MEMORY POSITIONS
With the ignition on or in Accessory mode:
1. Adjust the driver's seat, power outside mirrors and the power
steering column to the desired positions.
2. Press and release the SET button on the driver's door. A beep
will sound. Immediately press and hold button 1 until two
beeps sound.
3. Repeat the steps using button 2 for a second driver.
SET EXIT POSITION
1. Adjust the driver's seat, power outside mirrors and the power
steering column to the desired positions.
2. Press and release the SET button. A beep will sound.
Immediately press and hold the
beeps sound.
RECALL POSITIONS
Press button 1, 2 or Exit. If the vehicle is moving, press and
hold the button until the seat and mirrors reach the set position.
Exit button until two
MEMORY SEATS ♦
PASSENGER MEMORY SEAT
The front passenger memory seat operates the same as the driv-
er's seat. Use the memory seat controls, located on the passenger's
door, to save and recall settings for the front passenger's seat.
ADDITIONAL DRIVER'S SEAT ADJUSTMENTS
Feature Selection
Press and release the tab on the Feature Select control knob,
located on the driver's seat, to display seat adjustment features
on the infotainment screen. Press and hold the tab to scroll
through the adjustments.
Use the 4-way control pad on the control knob to make adjust-
ments up, down, forward, or rearward to the selected feature.
Massage
With the ignition on, press the massage control on the driver's
seat to recall the last massage type and intensity.

ELECTRIC PARKING BRAKE

To apply the parking brake, pull the
Parking Brake switch on the
left side of the instrument panel.
To release the parking brake,
turn on the ignition, press the
brake pedal, and then press the
switch.
16
♦
♦
See Seats and Restraints in your Owner's Manual.
See Driving and Operating in your Owner's Manual.