Gigabyte M1022 User Manual page 36

Warning: Please pay attention to the following information regarding the battery pack:
1. Be sure to recycle the waste batteries.
2. Do not place the batteries near high-temperature locations, fire source or in burning fire as
this may cause the batteries to explode
3. Do not assemble/disassemble /modify the batteries without authorization.
4. Use the battery pack provided by the original manufacturer only. Batteries other than those
supplied by the original manufacturer may damage the device.
Keyboard
Trouble
Press character keys but number displayed
instead of character
Confusing display
Warning: Please pay attention to the following information about keyboard maintenance.
1. Dust build-up may occur to the keyboard after long-term use. It is recommended to clean
the keyboard with a small brush. Please shut down the machine before cleaning the
surface of the keyboard and wipe it with a soft cloth dipped in cleaner or water gently.
2. In case any liquid enters the keyboard, shut off the power supply immediately, remove the
batteries and contact the original manufacturer directly for repair. Do not disassemble the
keyboard yourself for repair.
Hard disc drive (HDD)
Trouble
HDD can't be booted
HDD performs very slowly
Warning: Please pay attention to the following information about Hard Drive maintenance.
1. The hard disk is a high-speed data storage device. Avoid using the Booktop in unstable
locations as far as possible to prevent hard disk damage and data loss.
2. Please use the computer in accordance with normal startup/shutdown procedures;
improper startup/shutdown may shorten the service life of the hard disk
Solution
The operating system is corrupted by incorrect operation or virus. Try to
clean virus and then configure your operating system correctly.
Maybe the documents of your OS run in error; please refer to the
manual of your OS.
There is too much file fragment. Use disk defrag tools to rearrange the
programs on the hard disk.
Solution
Check if Num Lock is activated.
Make sure there is no software to configure the
keyboard.