Chapter 6 Troubleshooting / Q&A; Troubleshooting - Gigabyte M1022 User Manual

Chapter 6 Troubleshooting / Q&A
This chapter contains advice and solutions to a few basic troubles you might encounter when
you use M1022 Booktop. Please refer to this chapter and follow the instructions to solve
troubles.

6.1 Troubleshooting

Warning: Under the condition that you can't handle trouble, please refer to your dealer
to get professional service.
AC Adapter
Trouble
No power supplies to M1022 Booktop
Battery pack
Trouble
No power supplies to M1022
Booktop
Can't be recharged after
connecting AC Adapter
Battery life is not as long
as it should be
Make sure the AC adapter is well connected to
the power source and M1022 Booktop.
Check the cable and plug to make sure they
are OK. If they are broken, please contact your
local dealer ASAP.
Solution
The remaining power in battery pack may be not enough to power
on the machine. Connect AC Adapter to recharge it.
Check temperature of battery pack's surface. Battery pack can't be
recharged if its temperature
is too high or too low. Recharged it after its temperature is the
same with the normal environment one.
If battery pack is fully discharged, it won't be recharged at once.
Please wait for some minutes.
If the power indicators of battery pack are always not lit up,
its life may be over. Please contact your dealer to buy another one.
Battery life depends on using condition of M1022 Booktop.
You can change the settings in Power Manager of OS to save
power.
Battery pack can't exert its full capacity if it works when not fully
recharged frequently. Power M1022 Booktop by battery pack until
its power drops to a critically low level and the machine emits a
high-pitched beep or displays a warning message; after that,
recharge battery pack to make battery pack work longer.
Solution