Canon EOS M100 Help Manual page 96

Incorrect password/Incorrect Wi-Fi security settings
Check the access point security settings ( = 13).
●
IP address conflict
● Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
● You may be in an environment where Wi-Fi signals are obstructed.
● Avoid using the camera's Wi-Fi function around microwave ovens and other
devices that operate on the 2.4 GHz band.
● Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
● Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
● If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Customer Support Help Desk.
Receiving failed
Insufficient space on card
● There is not enough free space on the memory card in the target camera to
receive images. Erase images to create space on the memory card, or insert a
memory card with sufficient space.
Receiving failed
Memory card locked
● The write-protect switch of the memory card in the camera to receive the images
is set to the locked position. Slide the write-protect switch to the unlocked
position.
Receiving failed
Naming error!
● When the highest folder number (999), and the highest image number (9999)
have been reached on the receiving camera, images cannot be received.
Insufficient space on server
● Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create
space.
● Use Image Transfer Utility to save the images sent by the Image Sync server to
your computer.
Check network settings
● Check to make sure your computer can connect to the Internet with the current
network settings.
Wireless Features/Accessories
Wireless Features
Accessories
Learning About the Camera
Setup and Basics
Shooting
Playback
Settings
Troubleshooting
Errors and Warnings
Appendix
Index
96