Table of Contents
Advertisement
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back
MOV/Cannot play back MP4
●
Unsupported or corrupt images cannot be displayed.
●
It may not be possible to display images that were edited or renamed on a
computer, or images shot with another camera.
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot modify/
Unselectable image.
●
The following functions may be unavailable for images that were renamed or
already edited on a computer, or images shot with another camera. Note that
starred (*) functions are not available for movies.
Magnify*, Rotate*, Rating, Edit*, Print List* ( = 45), and Photobook Set-up*
( = 46).
Invalid selection range
●
When specifying a range for image selection, you attempted to choose an initial
image that was after the final image, or vice-versa.
Exceeded selection limit
More than 998 images were selected for Print List ( = 45) or Photobook Set-up
●
( = 46). Choose 998 images or less.
Print List ( = 45) or Photobook Set-up ( = 46) settings could not be saved
●
correctly. Reduce the number of selected images and try again.
●
You attempted to choose more than 500 images in Protect, Erase, Rating,
Print List ( = 45), or Photobook Set-up ( = 46).
Naming error!
●
The folder could not be created or images could not be recorded, because the
highest supported folder number (999) for storing images on the card has been
reached and the highest supported image number (9999) for images in folders
has been reached. Change MENU > [ 1] tab > [File Numbering] to [Auto Reset],
or format the memory card.
Lens Error
●
There is a communication problem between the camera and lens. Clean the lens
contacts and mount the lens correctly on the camera.
●
Frequent display of this error message may indicate damage. In this case,
contact a Customer Support Help Desk.
A camera error was detected (error number)
●
If this error message is displayed immediately after a shot, the image may not
have been saved. Switch to Playback mode to check for the image.
●
Frequent display of this error message may indicate damage. In this case, write
down the error number (Exx) and contact a Customer Support Help Desk.
File Error
●
Correct printing ( = 41) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Print error
●
Check the paper size setting ( = 43). If this error message is displayed when
the setting is correct, restart the printer and complete the setting on the camera
again.
Ink absorber full
●
Contact a Customer Support Help Desk to request assistance with ink absorber
replacement.
Wi-Fi
Connection failed
●
No access points were recognized. Check the access point settings ( = 13).
●
A device could not be found. Turn the camera off and on again, and retry the
connection.
●
Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
●
The WPS buttons on numerous access points were pressed simultaneously.
Try reconnecting again.
No access points found
●
Check to make sure that the access point is turned on.
●
When connecting to an access point manually, make sure that you entered the
correct SSID.
Wireless Features/Accessories
Wireless Features
Accessories
Learning About the Camera
Setup and Basics
Shooting
Playback
Settings
Troubleshooting
Errors and Warnings
Appendix
Index
95
- Quick Links:
- Available Wireless Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
