Finding Images With The Front Dial - Canon EOS M100 Help Manual

Finding Images with the Front Dial

● Use the front dial to find and jump between desired images quickly
according to your specified conditions. The following conditions (jump
methods) can be specified.
Displays images you have rated.
Jumps to the first image in each group of
images that were shot on the same date.
Displays 1 image at a time.
Jumps by 10 images at a time.
Jumps by 100 images at a time.
● After you have chosen a condition, turn the
images matching the condition or jump by the specified number of
images forward or back.
● The conditions [ ], [ ], [ ], [ ], or [ ] are displayed only when
some images have these ratings. Similarly, [ ]/[ ] is displayed only
when images have been rated.
● Use [ ] to jump between images with any rating.
Protecting Images
● To cancel protection, press the button to choose [
choose [ ], either by pressing the / buttons or turning the
dial. [ ] is no longer displayed.
● Protected images on a memory card will be erased if you format the
card.
● Protected images cannot be erased using the camera's erasure
function. To erase them this way, first cancel protection.
● You can also protect images by choosing MENU > [
[Protect].
Protecting Multiple Images
● To cancel protection (and remove [
press the
● Images are not protected if you switch to Shooting mode or turn the
camera off before saving your changes.
● You can also select or clear images on the image selection screen
by touching them. A confirmation message is displayed if you
touch [
● You can also protect images when [Accept changes?] is displayed by
touching [OK].
Protecting a Range of Images
dial to view only
● When selecting the last image, you cannot select an image before the
first image.
● To cancel protection for groups of images, choose [Unlock] on the
[Select Range] screen.
● You can also display the screen for choosing the first or last image by
touching an image on the [Select Range] screen.
● You can also protect images by touching [Protect] on the [Select
Range] screen.
Clearing All Protection at Once
], and then
● You can clear protection from all images at once. Choose MENU >
[
to choose [OK].
1] tab >
] display), when [
button again.
].
1] tab > [Protect] > [Unprotect All Images]. Press the / buttons
Wireless Features/Accessories
Wireless Features
] is displayed,
Accessories
Learning About the Camera
Setup and Basics
Shooting
Playback
Settings
Troubleshooting
Errors and Warnings
Appendix
Index
81