Status Led - Shure ULXD8 User Manual

Transmitter Controls and Connectors
① Power Button
Press and hold for two seconds to turn
microphone on or off.
② Mute/Active Button
Four settings are available for the mute/
active button:
- Toggle: Press to switch between
active and mute states
- Push-to-Mute: Hold button to mute
microphone
- Push-to-Talk: Hold button to activate
microphone when speaking
- Disabled: Button functionality off

③ Status LED

Indicates microphone's audio status.
④ Low-Battery LED
- Off = More than 30 minutes of
battery life remain
- On = Less than 30 minutes of
battery life remain
⑤ Infrared (IR) Port
Align with receiver IR port to send
settings to transmitter.
⑥ Charge Connector
Connects to networked chargers.
⑦ Gooseneck Microphone
ULXD8 base fits 5", 10", and 15"
Microflex series microphones.
Status LED
To change status LED behavior, use
Wireless Workbench or ULXD receiver
front panel.
ULXD6 and ULXD8 (with MX400
series gooseneck)
Active
Green (factory
setting)
Red
Red
ULXD8 (with MX400R series
gooseneck)
Active
Red (factory setting)
Red
5
Muted
Red (factory setting)
Off
Flashing red
Muted
Off (factory
setting)
Flashing