Transmitter Status Led; Wearing The Headworn Microphone; Wearing The Bodypack Transmitter; Correct Microphone Placement - Shure GLX-D User Manual

Transmitters
① Antenna
Carries wireless signal.
② Status LED
LED color and state indicate transmitter status.
③ Power Switch
Turns the transmitter on/off.
④ TA4M Input Jack
Connects to a 4-Pin mini connector (TA4F) microphone or instrument
cable.
⑤ Micro USB Charging Port
Connect to USB battery charger.
⑥ Link Button
• Press and hold within 5 seconds of power-on to manually link with
receiver
• Press momentarily to activate Remote ID function
⑦ Battery Compartment
Holds 1 Shure rechargeable battery.
⑧ Microphone Cartridge
GLXD-2 transmitter models are available with the following cartridge
types: SM58, Beta 58, SM86, Beta 87A.

Transmitter Status LED

LED is green during normal operation.
LED color or flashing indicates a change in transmitter status as shown in
the following table:
Color State Status
Green Flashing transmitter attempting relink with receiver
(slow)
Flashing unlinked transmitter searching for receiver
(fast)
Flashes indicates locked transmitter when power switch
3 times is pressed
Red On battery life < 1 hour
Flashing battery life < 30 minutes
Red/ Flashing remote ID active
Green
Amber Flashing battery error, replace battery

Wearing the Bodypack Transmitter

Clip the transmitter to a belt or slide a guitar strap through the transmitter
clip as shown.
For best results, the belt should be pressed against the base of the clip.
4 3
1
off on
7

Wearing the Headworn Microphone

• Position the headworn microphone 13 mm (1/2 in.) from the corner of
your mouth.
• Position lavalier and headworn microphones so that clothing, jewelry,
or other items do not bump or rub against the microphone.

Correct Microphone Placement

• Hold the microphone within 12 inches from the sound source.
• For a warmer sound with increased bass presence, move the
microphone closer to the sound source.
• Do not cover grille with hand.
2
GLXD2
on
5
6
6
7
1
13 mm
(.5 in.)
8
2
3
5
5