EverFocus ed610 Operation Instructions Manual page 16

1/3” ccd color day/night plus wide dynamic range outdoor vandal dome camera

Hide thumbs Also See for ed610:

Table of Contents

Step 2

Open the dome cover and place the Focus aiding lens cap on the lens, making sure that the

cap's notch is resting on the zoom knob.

Step 3

With cap on, adjust the focus and zoom rings by loosening the knobs and turning the rings

until subject is in focus. Retighten the knobs when done.

Step 4

When finished adjusting focus and zoom, remove the focus aiding cap from the camera lens,

replace the dome cover and secure the cover by turning it clockwise. See Section 2.2.4 below for

additional information.

NOTE: It is recommended to put the desiccant pack under the bracket. Or, use a cable tie to secure it

before placing the cover back on the camera.

- 15 -

Table of Contents