Table of Contents
Advertisement
User: admin
Password: *****
Note: The factory default management IP and subnet mask are
255.255.255.0. If you have not set any user profile for GRT-501, enter the factory
default user "admin" and password "admin" to logon the device.
3.3 Web browser
Make sure the correct Ethernet cable is used for connecting the LAN port of your computer
to GRT-501. The LAN LNK indicator on the front panel shall light if a correct cable is used.
Starting your web browser and connecting to the management IP of GRT-501(192.168.0.1
is the default IP), wait for the login screen appears. When you see the login screen, enter
the correct user and password and then you can logon to GRT-501.
Open web browser and type http://192.168.0.1 in the browser's address box. This
number is the default IP address for this device. Press Enter.
A user name and password prompt will appear. The default username and password is
"root". Click OK button and you will login the GRT-501 for management.
Note: The factory default management IP and subnet mask are
255.255.255.0. If you have not set any user profile for GRT-501, enter the factory
default user "root" and password "root" to logon the device.
GRT-501 G.SHDSL.bis Bridge Router User's Manual
-
12
-
192.168.0.1
and
192.168.0.1
and
Advertisement
Table of Contents
