Table of Contents
Advertisement
Click the button<Finish> to complete the USB driver installation.
3. Introduction to WEB Configuration
3.1 Quick Setup
The Quick Setup allows the user to configure the ADSL router for DSL connectivity and
Internet access. It also guides the user though the WAN network setup first and then the
LAN interface setup. You can either manually customize the router or follow the online
instruction to set up the router.
The ADE-3410v2 supports the following five network operating modes over an ATM
PVC WAN interface.
PPP over Ethernet (PPPoE)
PPP over ATM (PPPoA)
MAC Encapsulated Routing (MER)
IP over ATM (IPoA)
Bridging
The following configuration considerations apply:
The WAN network operating mode operation depends on the service provider's
configuration on the Central Office side and Broadband Access Server for the PVC. If the
service provider provides PPPoE service, then the connection selection depends on
whether the LAN-side device (typically a PC) is running a PPPoE client or whether the
ADE-3410V2 is to run the PPPoE client. The ADE-3410V2 can support both cases
simultaneously.
If some or none of the LAN-side devices do not run PPPoE client, then select PPPoE. If
every LAN-side device is running a PPPoE client, then select Bridge in PPPoE mode,
14
Advertisement
Table of Contents
