Alcatel-Lucent 7210 SAS D Quality Of Service Manual page 208

Service Ingress MAC QoS Policy Match Commands
ieee-address — The MAC address to be used as a match criterion.
Parameters
Values
ieee-address-mask — A 48-bit mask to match a range of MAC address values.
This 48-bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
All packets with a source MAC OUI value of 00-03-FA subject to a match condition should be specified
as: 0003FA000000 0x0FFFFF000000
Default
Values
etype
Syntax etype <0x0600..0xffff>
no etype
Context config>qos>sap-ingress>mac-criteria>entry
Configures an Ethernet type II value to be used as a service ingress QoS policy match criterion.
Description
The Ethernet type field is a two-byte field used to identify the protocol carried by the Ethernet frame. For
e.g. 0800 is used to identify the IP v4 packets.
The Ethernet type field is used by the Ethernet version-II frames. IEEE 802.3 Ethernet frames do not use the
type field. For IEEE 802.3 frames use the dsap, ssap or snap-pid fields as match criteria.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and cannot be part of the same
match criteria.
The no form of this command removes the previously entered etype field as the match criteria.
None
Default
etype-value — The Ethernet type II frame Ethertype value to be used as a match criterion expressed in
Parameters
hexadecimal.
Values
Page 208
HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is a hexadecimal digit
Format Syntax
DDDDDDDDDDDDDD
0xHHHHHHHHHHHH
0bBBBBBBB...B
0xFFFFFFFFFFFF (hex) (exact match)
0x00000000000000 — 0xFFFFFFFFFFFF (hex)
0x0600 — 0xFFFF
7210 SAS D, E OS Quality of Service Guide
Example
281474959933440
0xFFFFFF000000
0b11110000...B