Table of Contents
Advertisement
®
Intel
Server Chassis H2000 Family TPS
PMBus Input power monitoring accuracy
6.0%
5.0%
4.0%
3.0%
2.0%
1.0%
0.0%
Power Management Policy
3.8
When working with Intel
and temperature for critical failures. When there is a fan failure and a critical temperature event
at the same time the node will be powered down. When this occurs the node will need to be
manually powered back on.
®
Additionally on Intel
Server Board S2600JF/S2600WP/S2400LP, the BMC on node 3 and node
4 will monitor for a power supply over current condition or power supply over temperature
condition. If either of these occur and the Shutdown Policy has been enabled then the node will
be powered down. When this occurs the node will need to be manually powered back on but if
the over current or over temperature event is detected again the node will be powered back off.
The following table shows the scheme of system power redundancy mode with node behavior:
Intel
Server System H2000
Intel
®
Load with 2x 1200W
supplies
System Power Load
<1200W
<1600W
Revision 1.5
Input power, W
Figure 14. PMBus Monitoring Accuracy
®
Server Board S2600JF, the BMC on each node will monitor its fans
Table 34. Power Management Policy
Server System H2000
®
System Power Redundancy
Load with 2x 1600W
supplies
Unconstrained
Intel order number: G59059-006
Accuracy, +/-W
Accuracy, +/-%
25
20
15
10
5
0
System behavior with one PSU AC lost or
Mode
No system throttling. All 4 nodes
Power Sub-System
failed
33
Advertisement
Table of Contents
