®
Intel
Server Chassis H2000 Family TPS
used. In addition the insulation system must comply with reinforced insulation per safety
standard IEC 950. Separation between the primary and secondary circuits, and primary to
ground circuits, must comply with the IEC 950 spacing requirements.
3.2.18
AC Power Inlet
The AC input connector should be an IEC 320 C-14 power inlet. This inlet is rated for
10A/250 VAC.
The AC power cord must meet the following specification requirements:
DC Ouput Specification
3.3
3.3.1
Output Power/Currents
The following table defines the minimum power and current ratings. The power supply must
meet both static and dynamic voltage regulation requirements for all conditions.
Parameter
PSU SKU
+12V main (200-240VAC)
+12V main (100-127VAC)
+12V
Notes:
Revision 1.5
Cable Type
Wire Size
Temperature Rating
Amperage Rating
Voltage Rating
Figure 11. AC Power Cord Specification
Table 19. Load Ratings for single power supply unit
Min
0.0
0.0
1
0.0
STB
Intel order number: G59059-006
SJT
16 AWG
105º C
13 A
125 V
Max
Peak
1200W
1600W
1200W
100
133
133
83
83
110
3.0
3.5
3.5
Power Sub-System
Unit
2,3
1600W
175
A
110
A
2.4
A
21