Table of Contents
Advertisement
ERROR CODE
"HEAT ERROR CALL FOR
SERVICE"
"COMM ERROR CALL FOR
SERVICE"
or
"FAIL COMM ERROR"
NOTE: If any of these errors occur during a Clean or Delime cycle, the oven will shut down and display
the following messages:
WARNING (Flashing)
______ ERROR
WARNING (Flashing)
DO NOT OPEN DOOR
WARNING (Flashing)
DO NOT USE OVEN
WARNING (Flashing)
CALL FOR SERVICE
If you get this message, turn the oven off, do not attempt to open the door, and call for service.
DESCRIPTION
The
oven
temperature
doesn't rise from 150F to
300F within 5 minutes.
Problem with the heating
elements.
If the controller has lost com
munication with the relay
board.
15
Operation
Troubleshooting
ACTION
Call for service.
Call for service.
Advertisement
Table of Contents
