Table of Contents
Advertisement
8. Slide the studs on the back of the actuator box
into the holes in the actuator bracket on the
drain pipe.
9. Attach with the four nuts provided in the hard
ware bag.
Figure 9
10. Attach the actuator arm to the actuator tab. Be
sure to align the crosshair on the arm with the
slot on the tab.
11. Reinstall the actuator tab bracket.
Figure 10
12. Plug the actuator in to the power connection
on the bottom of the oven. Slide the plug sup
Installation
port bracket, found in the hardware bag, on
top of the actuator box. Secure the bracket
with the tie wraps provided.
13. Slide the actuator mounting bracket up until it
touches the bottom of the oven. Secure using
the four bolts provided.
14. Tighted the bolts on the back of the actuator
box.
9
Oven Assembly
Figure 11
Figure 12
Advertisement
Table of Contents
